Hardware Management/Hardware Management Module: Difference between revisions
Jump to navigation
Jump to search
Eric.shobe (talk | contribs) |
Eric.shobe (talk | contribs) mNo edit summary |
||
| Line 47: | Line 47: | ||
|} | |} | ||
==Accepted Hardware== | |||
==Shared Hardware specifications still under review== | |||
PLEASE NOTE THESE HAVE BEEN SHARED WITH THE COMMUNITY AND ARE STILL UNDER REVIEW BUT NOT YET ACCEPTED BY THE IC | |||
===Alpha SNC-60x0-486F (Mont Blanc) - 48x25G switch with 6x100G uplinks using Tomahawk+ (BCM56963)=== | |||
* Latest version/spec: [http://files.opencompute.org/oc/public.php?service=files&t=d13fc6755539b9b3eeb67cde3a498f53 Specification v0.1] | |||
* Slides used for presentation: [http://files.opencompute.org/oc/public.php?service=files&t=2decacd849dbee0f6a83e0dc59ffa9c7 slides] | |||
* License: OCPHL - Permissive | |||
* Spec status: Shared/community reviewed- Feb 13, 2017 | |||
* Contact: Robert Chu | |||
==Get Involved== | ==Get Involved== | ||
Revision as of 17:36, 23 September 2020
Welcome
- Welcome to the OCP Hardware Management Module Sub-project. This is a sub-project of the OCP Hardware Management Project
- This Project is open to the public and we welcome all those who would like to be involved.
- Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP OCP Policies page. If you have any questions please contact OCP.
Charter
This Subproject creates designs and specifications to enable interoperable hardware for platform manageability, in the form of System on a Module (SOM) designs. Deliverables from this project will include:
- Specification for the interface between the System on a Module and the underlying platform
- Design guides for platform designers wanting to use the module
- Designs for reference modules and carrier cards
Project Overview
The management controller module separates the common platform management hardware and places them behind a connector. the module is specified by its connector pin-out The module may have one or more form-factors
Sub-Project Leadership
- - Eric Shobe (Dropbox)
- - Jared Mednick (Dropbox)
- - Mailing List
Release Candidate (RC) Docs
| Name | Format | Version | Date | Contributor | Link |
|---|---|---|---|---|---|
| OCP RunBMC DaughterBoard Card Design Specifications | 1.4.1 Final | 08/15/2020 | OCP HW Management | Download |
Accepted Hardware
PLEASE NOTE THESE HAVE BEEN SHARED WITH THE COMMUNITY AND ARE STILL UNDER REVIEW BUT NOT YET ACCEPTED BY THE IC
Alpha SNC-60x0-486F (Mont Blanc) - 48x25G switch with 6x100G uplinks using Tomahawk+ (BCM56963)
- Latest version/spec: Specification v0.1
- Slides used for presentation: slides
- License: OCPHL - Permissive
- Spec status: Shared/community reviewed- Feb 13, 2017
- Contact: Robert Chu
Get Involved
- Participate in the discussion, mailing list: Mailing List Info
- Participate in HW Management Module sub-project meetings
- - OCP Calendar