Governance
Table of Contents
PURPOSE
This Governance document serves to provide clarity to the OCP Membership, the Tiered Membership requirements and the Tiered Membership Volunteer Leadership that serves the OCP Community. In the case of any conflict between the Bylaws and this Governance document or any supporting documents, the Bylaws will govern. In the event of a conflict among any of the other OCP Governance Documents, including but not limited to the Membership Agreement, the Tiered Membership Requirements and Benefits Policy, the Membership Logo Terms and Conditions, the Solution Provider /Component Provider Agreement, or the Certification Mark License Agreements, the other agreement will govern, not this Governance document. Only the OCP Foundation Staff can modify or amend this Governance document. All other suggestions for change must be brought forward to the OCP Staff and the OCP Foundation Staff will apply those changes upon their discretion. This Governance document is subject to change without notice.
VOLUNTEER LEADERSHIP
Purpose of the Volunteer Leadership
The OCP’s Board of Directors (http://www.opencompute.org/about/board/) approves the formation of the Open Compute Projects, reviews the charters for each project and appoints the initial Project Committee chairs (PCC) also known as Project Lead(s) and the initial Incubation Committee Representative (ICR). The OCP Community requires a standard by which the project communities can govern themselves with oversight from the OCP Foundation and its employees. Leadership Positions are defined as the following:
- Board Director Seat
- Incubation Committee Representative (ICR)
- Project Lead (PL), and
- Leader of an approved OCP Regional Community
Leadership Positions are not appointed or given to individuals or organizations based on their membership level, but must go through the nomination and election process. The limitations for the number of leaders per organization is based on membership levels.
Election Terms
PL(s) and the ICR are elected by the community for a period of 2 years. Restrictions:
- No one organization can have more than three people in a Leadership Position at any one given time.
- No one person can hold more than one Leadership Position at a time.
- The number of Leadership Position seats that can be held by an organization is dependent on membership level, and other requirements as set forth in the Tiered Membership requirements and Benefits Policy.
Project Lead (PL)
Each project will have at least one PL. Under special circumstances, the project community may elect 2 co-leads to serve jointly for the project. PL(s) will be elected for a term of 2 years. The current term is June 1st of Year 1 through to June 1st Year 2.
Incubation Committee (IC)
The Chair and Vice Chair positions on the IC will continue to be appointed positions. The OCP Foundation Board will appoint these positions, which are excluded from leadership limits. The ICR will be an elected position for a two (2) year term. The current term is June 1st of Year 2 through to June 1st Year 4. These elections and subsequent terms alternate annually with the PL terms. Each project will have one IC Representative (ICR).
Current Election Timelines
Project Lead Elections
2018 Regular election start - nomination process to begin June 2018. Voting process to begin July, 2018. Project Leads to be announced August, 2018.
IC Elections
Regular Election for IC was just concluded in Aug 2017. Next IC Election is slated for June 2019.
Eligibility
To be eligible to serve as a PL or ICR the following must apply:
Project Lead (PL)
- All OCP Corporate Members at the Silver, Gold, or Platinum level are eligible to nominate someone from their organization to become a PL.
- Community Level Corporate Members are eligible to nominate someone from their organization only if their organization has made a valid Contribution to OCP.
Incubation Committee Representative (ICR)
- An individual nominated to become an ICR must belong to a Silver, Gold or Platinum Level Member. Community Level Corporate Members are not eligible to nominate or serve on the IC.
Limitations
- No one person can hold more than one Leadership Position at any given point in time regardless of membership level. Organizations can only hold one seat at a time on each individual governing body at a time. For organizations who can hold more than one Leadership Position, these positions need to be split across the governing bodies.
Nominations
Typically the nomination phase opens 6 weeks prior to the expiration of term. A blog post will be published on the OCP website when the nomination phase opens. In that post, a web form link will be included. The web form will not be available until that phase of the election is open.
Voting
PL
To vote for a PL, individuals must be an OCP Corporate Member at the Community, Silver, Gold, or Platinum level. Foundation employees and OCP Board of Directors are also eligible to vote for the PLs.
ICR
To vote in an IC election an organization must be an OCP Corporate Member at the Silver, Gold or Platinum Member. Based on the organization's Corporate membership level, number of voting keys will be distributed. The Member’s organization will determine which individuals the keys will be sent to. Keys are given out as such:
- Silver Members will receive 1 key
- Gold Members will receive 2 keys
- Platinum Members will receive 3 keys
Special Circumstances
If a PL resigns from Current Corporate Member Organization
If an OCP project lead (PL) resigns from their position prior to the end of the term or if they can no longer fulfill their duties, then the organization that the PL belongs to can put a name or names forward to replace the person who is stepping down. The IC will then vote to accept this replacement. If the vote is accepted, the replacement will hold the seat until the PL next election. If the IC rejects the replacement, then the Foundation staff will send a “Call for Nominations” to the existing OCP Corporate Members to nominate a PL for the interim. A vote will be held by the IC Committee and the winner of the vote will be appointed as the new PL for the interim term. If the OCP Project is running with two co-leads and one of the co-leads leaves his Corporate Member Organization, the remaining co-lead will become the new PL until the next PL election.
If a PL resigns from Corporate Member Organization and the organization is no longer an OCP Member
If one or both OCP Project Leads (PL) leave his current organization and the organization is no longer an OCP Member, the organization has the option to renew their membership and then nominate an alternative staff member to fill that interim PL role until the next PL election. If the organization opts not to renew their membership to OCP, a special election will be required. The Foundation staff will send a “Call for Nominations” to the existing OCP Corporate Members to nominate a PL for the interim. A vote will be held by the IC Committee and the winner of the vote will be appointed as the new PL for the interim term. If one or both OCP project leads (PL) leave his current organization and the organization has decided not to renew their membership, the PL has the option to approach their new organization for a Corporate Membership opportunity at the Silver, Gold, or Platinum Level. If their new organization becomes an OCP Corporate Member at the Silver, Gold, or Platinum level, the PL can continue to serve until the next PL election.
If a ICR resigns from Current Corporate Member Organization
If an OCP ICR resigns from their position prior to the end of the term or if they can no longer fulfill their duties then current Corporate Member organization can put a name or names forward as replacements. The Incubation Committee will then vote to accept this replacement. If the vote is accepted, there will be no special election and the replacement will hold the seat until the next IC election whichever is shorter. If the IC rejects the replacement then a special election will be called. Whomever wins the special election will hold the position until the next election.
If a ICR resigns from Corporate Member Organization and the organization is no longer an OCP Member
If the ICR leave his current organization and the organization is no longer an OCP Corporate Member, the organization has the option to renew their membership at a Silver, Gold, or Platinum level and then nominate an alternative staff member to fill that interim IC role until the next IC election. If the organization opts not to renew their membership to OCP, a special election will be required. The Foundation staff will send a “Call for Nominations” to the existing OCP Corporate Members to nominate a IC for the interim. A vote will be held and the winner of the vote will be appointed as the new IC for the interim term.
If a Corporate Member opts not to renew or downgrades their membership level
If a Corporate Member opts not to renew their membership to OCP and holds a PL or IC Leadership Position, they will be required to immediately step down from this leadership position. The Corporation will be informed of this requirement and will have 30 days to renew their membership at the same or higher level. If a Corporate Member opts to downgrade their membership to a Community Level and holds an IC or PL Leadership Position, the IC will be required to step down from that position. The Corporation will be informed of this requirement and will have 30 days to get their organization to renew their membership at the Silver, Gold, or Platinum level. If renewal has not occurred, OCP will inform the Member of this requirement and they will have 3 months or the next election, whichever is shorter to step down. If there are more than 3 months to the next election, the Foundation will call for a “Special Election” to fill that position in the interim, until the next election.
- If an ICR is out of office, they will nominate a PL to serve as a non-voting member of the IC in their stead.
- If a PL is out of office, the other PL (if available), or their ICR will serve in their stead.
- If a subproject lead is out of office, the PL will serve as the subproject lead in their stead.
Amended Policies and Procedures Effective March 1, 2018
Effective March 2, 2018, OCP has amended its Tiered Membership Requirements and Benefits Policy (“OCP Tiered Membership Policy”) Under the terms of the OCP Tiered Membership Policy as amended, any changes to membership requirements involving increased annual membership dues or other added/increased membership requirements (discussed more below) will not be effective for existing Members (Members prior to March 1, 2018) until after your next annual payment. However, all other revised terms are effective March 1, 2018. Please make a note of these changes for your records.
Contributions
OCP will be accepting all types of Contributions in 2018 and beyond to participate in OCP and fulfill membership requirements. We realize that our Members are utilizing OCP solutions in many different ways and we would like to hear more about their experiences and their expertise. Here are the various different types of Contributions and associated credit allocation.
Contribution Credit Structure
Type | Pre-Requisites | Contribution Requirements |
OCP Accepted™ Product | One Specification or one Design Package
• Each Spec and/or Design Package must meet 3 out of 4 OCP Tenets • Each Spec must have one 1 identified supplier with readily available product within a reasonable amount of time (120 days). • Each Design package must have one 1 identified supplier with readily available product within a reasonable amount of time (120 days) and the supplier must apply for the OCP Product Recognition Program (OCP Accepted™ Logo). |
1 Credit |
OCP Accepted™ Product | 5 OCP Accepted™ Product SKUs.
• Must be based on an approved OCP Spec. • Must meet 3 out of 4 OCP Tenets • Each SKU must carry the OCP Accepted logo. • Each SKU must be readily available within 120 days and be visible on Supplier’s website for purchase. |
5 SKUs = 1 Credit |
OCP Inspired™ Product | 5 OCP Inspired™ ƒ
Product SKUs. • Must be based on an approved OCP Spec. • Must meet 3 out of 4 OCP Tenets • Each SKU must carry the OCP Inspired™ logo. • Each SKU must be readily available within 120 days and be visible on Supplier’s website for purchase. |
5 SKUs = 1 Credit |
Reference Architechures | A documented and tested solution comprising:
- Two or more unique tested configurations (see below) - Two or more unique OCP Accepted™ Product SKUs. - > 50% content use of Orderable SKUs. - Contributor must provide product test documentation, certification info, and configuration details about the reference architecture and warrants that the reference architecture works as documented. - OCP may promote the Contribution of reference architectures via the OCP Marketplace. |
Case Dependent (0.5-1 Credit per item) |
Tested Configurations | A documented and tested configuration using an OCP Inspired™ or OCP Accepted™ Product and configured with additional hardware and operating system software and application software (specific use)
- Testing plan/results, configuration details must be provided. - Contributor warrants tested configuration will work in the defined use case and can provide support service. - Contributor responsible for accuracy of info. - OCP may promote the Contribution of tested configurations via the OCP Marketplace. |
10 tested configurations = 1 Credit |
White Papers & Case Studies | A white paper or case study explaining details of your use of OCP Accepted™ or OCP Inspired™ Products within your infrastructure. The white paper or case study must demonstrate 2 or more OCP Tenets and be accepted by the Foundation and IC Committee along with the appropriate agreements. OCP shall be allowed to promote this on the OCP website or promotional materials. | Case Dependent (0.25-1 Credit per item) |
Educational Videos or Quotable References or OCP-centric Technology Seminars
Organized Plug-fests or Engineering Workshops |
OCP may approve the following items with proper authorization and technical validation. The below items must utilize at least 2 OCP Tenets.
- Educational Videos for use of OCP Products or Reference Architectures - Testimonials and quotable customer references for relevant OCP Products, Test Configurations and Reference Architecture - Technology Seminars, when promoting the use of OCP Products, Test Configurations and Reference Architecture - OCP shall be allowed to promote this on the OCP website or promotional materials. |
Case Dependent (0.5-1 Credit per item) |
Contribution Requirements for Members
All members can make a contribution. While our Community and Silver members are not required to contribute, they are encouraged to participate and provide feedback. Our Gold and Platinum members must make contributions as part of their membership requirements, unless they have selected an opt-option option.
With many different ways to get credit for contributions, it is easier to participate and make submissions. Contributions will be tracked on a regular basis with check-ins at 3-month intervals for our Gold and Platinum members. This will allow plenty of touchpoint reminders and assistance to ensure contribution requirements are going to be met.
Annual Requirement:
- Community and Silver – No Contribution required
- Gold – 1 Contribution per year
- Platinum – 2 Contributions per year
1. Criteria for Contribution Submission
All Submissions must have the following before it is presented to the Project Community.
• Signed Membership Agreement
• Signed Logo Usage Agreement (as needed)
• Signed CLA (OCP or OWF)
• Signed Copyright License Agreement
• Checklist Initiated
2. Process for Contribution Approval by OCP
All Contribution submissions will follow the same process.
1. Presentation of preliminary submission to the Project Community via Project Leader(s).
- Presentation at monthly meetings, engineering workshops, OCP Summit, etc.
- Format can be .ppt proposal or a preliminary specification (see OCP Specification Template).
- All submissions must include the licensing language. (see License section in OCP Specification Template).
2. Feedback and collaboration
- Community will provide their feedback on relevance and impact from/by the Community
- Feedback may be incorporated in subsequent version of the document or spec.
3. Checklist
- With the help of the PL/IC/Foundation, the checklist needs to be completed.
- Checklist ensures contracts are completed.
- Checklist ensures submissions meet the requirements.
4. Review with Project Leads and Incubation Committee
- Presentation to the IC (see OCP IC Review Template)
- Completed Checklist
- Final documents are complete
- OCP Tenet review
5. Vote into the OCP Ecosystem
- Voting will be for approval of submissions
- Voting will be for credit allocation.
- Voting Period will last one week.
- Voting for Approve or Reject is determined by a simple majority.
- In the event of a tie vote, the OCP CTO will cast the tiebreaker vote.
- The IC voting record is public and can be seen here.
6. Publish to the Marketplace
- All approved specs and designs will be published to the Marketplace.
- All recognized products will be published to the Marketplace only if the Supplier is an OCP Solution Provider. Supplier must provide pictures, SKU# and a landing page for the OCP recognized product.
Contribution Annual Opt - Out Option for Gold/Platinum
Although the Community and the Foundation would really benefit from the plethora of Contributions detailed in the new Contribution Structure, we do understand that not all our Members will be able to meet their Contribution requirements every year. Both Gold and Platinum Members can opt-out of their annual Contribution requirements for a non-refundable financial donation. The Opt-out Option can be initiated at the start of membership cycle or at renewal. The Contribution Opt-Out fee is $30,000 USD per Contribution. It is non-refundable and will be invoiced in conjunction with the membership dues.
Contribution Opt-Out Fees
Gold - $30,000 USD per Contribution
Platinum - $30,000 USD per Contribution
Non- Compliance of Contribution Requirements
Non-compliance of the requirements will result in the lowering of the existing Tiered Membership level to the next lower tier. If Contribution requirements are not met by a Gold or Platinum Level Members within a year of the annual membership payment, they will not be allowed to remain at the Gold or Platinum level until the Opt-Out fee(s) are paid. Once the Opt-Out fee is made, the appropriate tier will be reinstated. Consistent non-compliance will result in renewal at only the Silver level. Members can only achieve upgrades to higher tiers upon meeting the appropriate Contribution requirements and no refund will be issued for membership fees already paid.
Sponsorship of OCP Events
Sponsorship of OCP Events for Silver, Gold, and Platinum Members
OCP will no longer be tracking hours for Gold and Platinum Members. As participation from our Corporate Members extends globally across multiple divisions and our membership grows, this is becoming increasingly more difficult to track. Instead, OCP is asking for Silver, Gold and Platinum Members to sponsor collaboration events that we host throughout the year. OCP Summit and corresponding events are not included. Events include engineering workshops, plug-fests, seminars, technology days, etc. that OCP conducts independently or in conjunction with a conference or partner. The value of the sponsorship is estimated to be $5,000 USD per event. Tiered Members can provide support for these events, including:
● Venue
● Services such as food, beverage or audio/video
● Promotional giveaways
● Hardware donations for OCP Inspired™ or OCP Accepted™ Products if applicable.
Annual Non-Summit Event Sponsorship Requirement for Silver, Gold, and Platinum Members
Silver | Gold | Platinum |
Required to support a minimum of 1 Non-Summit event | Required to support a minimum of 2 Non-Summit events | Required to support a minimum of 3 Non-Summit events |
Non-Compliance of Sponsorship Requirements
Non-compliance of the requirements may result in the lowering of the existing Tiered Membership level to the next lower tier, until the requirements are met. Once the requirements are met, the appropriate tier will be reinstated. Consistent non-compliance will result in renewal at only the Silver level. Members can only achieve upgrades to higher tiers upon meeting the appropriate requirements although no refund will be issued for membership fees already paid.
Opt-Out for Sponsorship
Although OCP would prefer our Tiered Members sponsor these events in some way, we do understand that not all our Members will be able to meet some or all of these requirements every year. In lieu of sponsoring an event, an Opt-Out fee of $5,000 USD can be made per event, and will satisfy the event sponsorship requirement.