Telcos
Welcome to the OCP Telco Project
This Project is open to the public and we welcome all those who would like to be involved.
There is an industry desire to apply the open hardware OCP model to the creation of open telecom optimized hardware. The OCP Telco Project enlists participants from Communication Service Provider (CSP) and carriers as well as software, board, sub systems, and semiconductor suppliers who are seeking to use open designs and data center infrastructure to deliver Telecom services.
As technologists across industries participate in this community, we are creating and refining OCP design specifications, making it possible for more companies to transition from their existing proprietary solutions to Open Compute Project (OCP) solutions gear, and interoperable, multi-vendor supplier support.
Scope
When OCP Accepted™ and OCP Inspired™ products are not sufficient nor deliver the technology needed by and for deployment into telecom and carrier data center or infrastructure, the Telco Project shall promote the creation of these products, specifications, and technologies.
- Firmware, software, and APIs for the remote management, service deployment, maintenance, monitoring, & telemetry of telecom hardware.
- Specs and designs that are interoperable with either the 19” EIA or OpenRack mechanical architecture unless targeted for deployment outside of the traditional Data Center or Central Office (e.g. Edge products).
- Creation of common architecture specifications which promote interoperability and a multi-vendor supply chain for telecom and Edge hardware.
- Creation of Telecom/carrier products derived from OCP products and approved specifications.
- Creation of Telecom/carrier products which compliment OCP products and specifications by either referenced to other open source foundations (TIP, ONF, Linux Foundation etc) or in collaboration with these foundations.
Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP Legal Docs page. If you have any questions please contact OCP.
Documents
- - Charter
- - OCP Presentation Template - please contact Michael Schill for a copy
Project Leadership
Incubation Committee Representative
- - Craig White (Nokia)
Project Leads
- - Loren Staley (Edgecore)
- - Ripin Checker) (Cisco)
Subproject Leads
- - Tanveer Saad (Nokia)
Get Involved
Regular Project Calls
This project meets monthly, at alternating times (please check the call calendar).
- Next Call - see calendar
Sub-Projects
Edge
- - Wiki
- - Mailing List
Recordings from Past Calls
Telco Project Technical Workshops
- - OCP Telco Workshop hosted by AT&T - Dallas, TX, Oct 29, 2018
- - OCP Regional Summit - Amsterdam, Netherlands, Oct 2, 2018
- - OCP Telco Engineering Workshop @ BCE - Austin, Tx, May 14th, 2018
- - OCP Engineering Workshop at DCD Colo & Cloud - Dallas, Tx, September 25th, 2017
- - OCP Engineering Workshop at BCE - Austin, Tx, May 15th, 2017
- - OCP Engineering Workshop - London, UK, November 2, 2016
- - OCP Engineering Workshop - University of New Hampshire, August 10, 2016
- - OCP Telco Meetup - Seoul, Korea, June 9, 2016
- - OCP Engineering Workshop - San Jose, CA June 2, 2016
- - OCP Engineering Workshop - Austin, TX May 23, 2016
- - OCP U.S. Summit - San Jose, CA Mar 9-10, 2016
- - OCP Engineering Workshop - San Antonio, TX Sep 16, 2015
- - OCP U.S. Summit - San Jose, CA Mar 9-11, 2015
Specs and Designs
Approved Contributions
- ADLINK CG-OpenRack-19 Half-Width OpenSled Server
- AT&T Open Fiber Distribution Hub Specification
- AT&T Cell Site Gateway Router
- AT&T DDC Specification
- AT&T OpenGPON V.1.3.1
- AT&T 16 Port XGS-PON vOLT V.1.3
- AT&T uCPE v2.1
- AT&T Disaggregated Approach to Firmware Upgrade for Whitebox and DCC
- Deutsche Telekom OpenGPON-OLT
- Edgecore AS7316-26X Cell Site Aggregation Router Specification & Design
- Edgecore AS7315-27X Disaggregated Cell Site Gateway (DCSG) Specification & Design
- Edgecore ASGvOLT-64 Open GPON-OLT Specification & Design
- EdgecoreAS7926-80X Aggregation Router Specification & Design
- Edgecore ASXvOLT16
- Nokia White Paper: "OPEN RACK SOLUTION BLUEPRINT"
- Radisys CG-OpenRack-19 v1.0
- Tencent OPC-4 System Specification
- UfiSpace Cell Site Gateway Router Specification & Design Package
- UfiSpace Distributed Disaggregated Chassis (DDC) Routing System S9705-48D Fabric White Box Specification
- UfiSpace Distributed Disaggregated Chassis (DDC) Routing System S9700-23D Line Card White Box Specification
- UfiSpace Distributed Disaggregated Chassis (DDC) Routing System S9700-53DX Line Card White Box Specification
- UfiSpace S9500-22XST Disaggregated Cell Site Gateway (DCSG) Specification
- UfiSpace S9501 Series Disaggregated Cell Site Gateway (DCSG) Specification
Draft Specs and other working Documents
- Edgecore AS5915-18X Disaggregated Cell Site Gateway Spec
- Edgecore AS5915-18X Presentation
- AT&T FHG and CAS presentation
- AT&T XGS MicroOLT vOLT V.1.0 (draft)
- AT&T 4 Port XGS-PON Hardened vOLT V.1.1 (draft)
- AT&T 1 PORT G.Fast DPU v2.0 (draft)
- AT&T 4 PORT G.Fast DPU v1.0 (draft)
- AT&T 8 PORT G.Fast DPU v1.0 (draft)
- AT&T 16 PORT G Fast DPU-Broadcom-v2.0 (draft)
- AT&T 16 PORT G.Fast DPU-Sckipio-v3.0 (draft)
- AT&T Port Open Programmable-PON OLT v2.0 (draft)
- Edgecore Contribution/Specification overview
- Edgecore AS7926-40/80X Aggregation Router Specification
- Orange 400V DC Power Feeding Architecture
- AT&T Converged Access Switch-CAS (draft)
- AT&T Front Haul Gateway (draft)
- UfiSpace S9600-48X Open Aggregation Router Specifciation